PRODUCTS, MATERIALS, AND EQUIPMENT SOURCE LIMITATIONS OWNER FURNISHED MATERIALS AND EQUIPMENT

 

PRODUCTS, MATERIALS, AND EQUIPMENT SOURCE LIMITATIONS  OWNER FURNISHED MATERIALS AND EQUIPMENT PRODUCT LISTING PROCEDURES FOR SELECTING PRODUCTS PRODUCT REQUIREMENTS NAMEPLATES 

PRODUCTS, MATERIALS, AND EQUIPMENT SOURCE LIMITATIONS  OWNER FURNISHED MATERIALS AND EQUIPMENT PRODUCT LISTING PROCEDURES FOR SELECTING PRODUCTS PRODUCT REQUIREMENTS NAMEPLATES

PRODUCTS, MATERIALS, AND instrumentation

 PART one – GENERAL

 1.1       SOURCE LIMITATIONS

   A.      To the best extent attainable, give product, materials, and instrumentation from Arab origin in accordance with the Special Condition Article entitled "Priority within the Use of National product and nationwide made product of the Gulf Cooperation member States" of an equivalent generic kind from one supply.

   B.      wherever product or materials, by nature, square measure offered solely from sources that don't on an individual basis comprise decent amount for the full project demand, choose product and materials from those individual sources that square measure most nearly equal and uniform in meeting the desired needs.

 1.2       OWNER appointed MATERIALS AND instrumentation

   A.      The Owner can furnish to Contractor at the Owner's warehouse or cargo area on the Work web site the things listed below to be used alone within the performance of the Work. Such things are going to be appointed while not value to Contractor; given that Contractor shall, at its expense, settle for delivery thence promptly, load, unload, transport to points of storage or use, and take care of such things till final disposition thence. Such things are going to be appointed to Contractor no later than the delivery dates indicated below, provided, however, that upon cheap advance notice to Contractor, such things is also delivered to Contractor before such earlier delivery at the time of acceptance of any such things receipt thence. The sign language of such receipt while not reservation in this shall preclude any future claim by Contractor that any such things were received from the Owner, such item is broken, lost, purloined or destroyed, Contractor shall apprize the Owner and shall repair or replace such item at Contractor's expense, provided, however, that any such repairs shall be performed given that, within the Owner's opinion, the manufacturer's warrantee of any item to be repaired shall not be adversely littered with such repair. things needed to get replaced might, at the choice of the Owner, get replaced by the Owner at contractor's expense. Upon completion of the Permanent Works and before Initial Acceptance, Contractor shall come, at its expense, all surplus and unused things to the Owner's warehouse.

             The materials and instrumentation to be appointed by the Owner shall encompass the following:

   B.      To the extent the above-listed materials and instrumentation square measure incorporated by Contractor into the Permanent Works, such materials and instrumentation shall not be thought-about to be appointed by Contractor for functions of the provisions contained within the General Condition hereof entitled "Period of Warranty". However, upon Contractor's acceptance of the materials and instrumentation from the Owner, Contractor shall be totally to blame for such things in accordance with the Special Condition hereof entitled "Responsibility for the Works".

 1.3       PRODUCT LISTING

   A.      Prepare a schedule during a kind acceptable to the Owner, showing the listing of principal product (by generic names) needed for the Work.

   B.      for every product show the proprietary product names and manufacturer names planned for incorporation within the work.

 

1.         Submittal: Submit three copies of product listing schedule at intervals thirty days of the supplying of the Notice to Proceed.

 

2.         Owner's review of product listing is for data solely and to facilitate identification of future needed submittals. The list of product isn't a substitute for needed submittals or acceptance of product.

 

1.4       PROCEDURES for choosing product

 

  A.      Performance Requirements: give product that befits the particular performances indicated or such that, and that square measure counseled by the manufacturer in writing for the appliance indicated.

 

  B.      Visual Matching: wherever the matching of a longtime sample is needed, the Owner is that the final decide of whether or not a product planned by the Contractor matches the sample satisfactorily.

 

  C.      Visual Selection: Except as otherwise indicated, wherever such that product needs embrace "...as hand-picked from manufacturer's customary colours, patterns, textures..." or words of comparable result, the choice of manufacturer and basic product is that the Contractor's choice, and therefore the future choice of color, pattern and texture are going to be created by the Owner.

 

1.5       PRODUCT needs

 

  A.      customary Products: wherever offered give customary product of varieties that are made and used antecedently and with success on alternative comes and in similar applications.

 

  B.      continued  Availability: wherever further amounts of a product, naturally of its application, square measure probably to be required at a later date for maintenance and repair or replacement work, give a typical, domestically made product that is probably going to be offered at such later date.

 

1.6       NAMEPLATES (Arabic and English)

 

  A.      Except as otherwise indicated for needed labels and in operation information, don't for good attach or imprint manufacturer's or producer's nameplates or logos on exposed surfaces of product which is able to be exposed to look at either in occupied areas or on the outside of the work.

 

  B.      Labels: find needed product labels and stamps on a hid surface, or wherever needed for observation when installation, on Associate in Nursing accessible surface that, in occupied areas, isn't conspicuous.

 

  C.      instrumentation Nameplates:

 

1.         give permanent nameplates on every item of service-connected or power operated instrumentation, indicate the manufacturer, product name, model variety, serial variety, capacity, speed, ratings and similar essential in operation information.

 

2.         find nameplates on Associate in Nursing accessible surface that, in occupied areas, isn't conspicuous.

 

1.7       ENVIRONMENTAL

 

A.        All instrumentation (operating) shall be put in and operated in compliance with all native laws, ordinances, rules and permits regarding environmental pollution management and abatement.